工艺工程师英文简历

时间：2021-08-31

工艺工程师英文简历

　　写个人简历不是在写作文要求有很多的书写的手法，像是比喻，烘托等等，在书写个人简历的时候就是将最没有用的词语去除，留下最有价值的词语。这样才能真正的达到了书写个人简历的时候的简明性原则了。不要无谓的形容词和语气词。要客观讲述，这样最为简单明了。

　　招聘用人单位的HR们在游览我们的个人简历的时候仅仅有15秒钟的时间，如果太多的废话就让我的.个人简历大打折扣。写个人简历不是写作文，如果又看到类似作文一样的个人简历，本来可以简短的20个字就可以说清楚的事情，非要整的洋洋洒洒的写上了200字左右。想想HR们会夸奖我们文采还是直接的将我们的个人简历丢掉垃圾筐中。社会是讲究利益和效率的，是不会想学校一样将什么文学，讲什么文采的。能够使用 10个字讲清的事情绝不实用11个字来描述，这就是书写个人简历的简明性原则。

　　下面是yjbys小编和大家分享的工艺工程师英文简历，更多内容请关注简历模板栏目。

　　篇一：简历模板

　　yjbys

　　Nationality:China (Mainland)

　　Current Place:DongguanHeight/Weight:172 cm?62 kg

　　Marital Status:SingleAge:27 years

　　Career Objective

　　Application type:Jobseeker

　　Preferred job title:Engineering/Draftsman: IE engineer 、 Engineering/Draftsman: PE engineer 、 Project Manager/Supervisor: Project engineer

　　Working life:4Title:No title

　　Job type:Full timeExpected Start date:In a month

　　Expected salary:￥5,000--￥8,000Preferred working place:Guangdong province

　　Work experience

　　Company's name:Dongguan Ergotron Precision Technology Co.,LtdBegin and end date: 2007-08-

　　Enterprise nature:Sino-foreign joint venturesIndustry: Communication/Telecom/Network Equipment

　　Job Title: Process Engineer

　　Job description: 1.Compile the SOP, FMEA,FAI leading, improve the output capability of the production line .

　　2.New model introduce, ass'y the sample, arrange the stations of the line, analyze and solve the issue in the line.

　　3.Accountable for analyzing and solving the issue in the production line .

　　4.Accountable for evaluating the CPA of the vendors and analysis reporting.

　　5.Accountable for the running of the ass'y line,making the response immediately to the issue of line,giving the containment action,analyzing and finding the root cause,giving the correct action ,preparing the report, guarding against happened again.

　　6.Accountable for implementing project of cost down. Cutting down the cost of production.

　　7.Accountable for improving the PPH of production line. Then improving the production capacity.

　　Reasons for leaving:

　　Company's name:China Petrol First Construction corporationBegin and end date: 2006-07-2007-07

　　Enterprise nature:State-owned enterprisesIndustry: Petroleum/Chemical Industry/Minerals/Geology

　　Job Title: Technician

　　Job description: 1. Accountable for all the necessary preparations for the project.

　　2. Accountable for control the schedule of project, trouble shooting the technical issue.

　　3. After complete the project. Accountable for inspecting the trial run of this machine and making the report.

　　Reasons for leaving: For further development

　　Educational Background

　　Name of School:Yangtze University

　　Highest Degree:BachelorDate of Graduation:2006-07-01

　　Name of Major 1:EngineeringName of Major 2:

　　Education experience:Start dateEnd dateEducation organizationMajorsCertificateCertificate No

　　2002-092006-07Yangtze UniversityProcess Equipment and Control EngineerinBachelor

　　2007-112007-12Nan ShengdeIE&JIT

　　2008-032008-03JunchengSpecial training about FMEA

　　2012-082012-08MinRa EnterpriseIE seven tools

　　Language Ability

　　Foreign Language:EnglishLevel:perfect

　　Chinese level:perfectCantonese Level:poor

　　Relevant skills and abilities

　　Rich experience in local technical management.

　　1. splendid capability at predicting,analysis,executing and communicating.

　　2. keep synonym in puzzle dom.

　　3. good manners, strong responsibility, great team work.

　　Skills:

　　1.Fluent oral english, rich in manufacturing professional vocabulary .

　　2.Familiar with plastic model , metal material and die-casting.

　　3.Familiar with the procedure of new product introducing.

　　4.Familiar with using IE method.

　　5.Familiar with the theoretical construct of mechanical transmission.

　　6.Finish the design and improvement of the mechanical equipment.

　　7.Analyze the issue with software.

　　8.Familiar with hardware and software, be good at office software, AutoCAD, 3d-max,photoshop and solid works.

　　Self-recommendation letter

　　i was born in wuhan. and I got my bacher degree in Yangtze University from 2002 to 2006. I major in mechanical engineering, from there I got sturdy theories. After graduated I worked in China Petro in Liaoning province. My position is a technician in Liaohe project. I've been there for 1 year. Then i quit that job and went to Guangdong province. In Augest 2007, I got the position of process engineer in Ergotron. I've been here for more than two years. I got much manufacturing knowledge and experience here. Such as IE, trouble shooting ,6 Sigma and so on.

　　篇二：简历模板

　　yjbys

　　Gender: Male

　　DOB: November 28, 1984 Height: 176cm

　　Present address: East Hengshan Road, Fengman District, Jilin City Marital status: Single

　　Graduation school: Yanbian University

　　Major: Mechanical Layout, Manufacturing and Automation Tel.:*E-mail: *

　　Position to be appointed: Process technology engineer Education and training:

　　2004.8—2008.6, Jilin Province Yanbian University, majoring in mechanical layout (CET Band 4, Computer Test Grade 2)

　　2001.8—2004.6, studied at the Jilin Province Lishu County Senior Middle School

　　1998.8—2001.6, studied at the Jilin Province Lishu County Taiping Middle School

　　Working experience:

　　Aug. 2008—now, I have been working at the Jilin Automobile Co., Ltd. of FAW

　　Introduction:

　　I. Aug. 2008-Dec. 2008，I practiced in all production workshops to know about stamping, painting and welding and process technology of auto of fitting shop.

　　II. Dec. 2008-Jan. 2010, I was engaged in production control in production department and promotion of lean production. I followed improvement experts who have made site improvement and guidance on Dong’an Auto Engine and Shulan General Machinery for half a month. I could master in elementary knowledge of lean production. I could grasp preparation methods of operation manual and essentials book and working procedure capacity list. And I was in charge of site 5S management of all workshops and daily improvement.

　　III. Jan. 2010-now, I have been working as site engineer of fitting shop in charge of site technology management and maintenance of standard operation. I participated in change of circle time of workshop and establishment from circles such as workers, machine, stuff to project layout and made follow-up, implementation and confirmation of policies. I amended standard operations of 15 stations of fitting shop and verified the site operation, equipment security capacity, key points guarantee and personnel qualification and workpiece supply. I submitted 18 improvement requirements and constituted 10 measures which effectively enhanced availability rate of work area and process quality assurance ability.

　　My summary:

　　I am honest and faithful and smart. I have strong study ability and could bear hardships and have good group cooperation spirit. For contacting Japanese workers in daily work, I have learnt earnest and meticulous working ways from staff members of the Toyota. I form good work style and better knowledge structure.

更多相关文章推荐阅读：

【工艺工程师英文简历】相关文章：